All LOGO!MAT Components are developed to make very little preservative maintenance neces-sary but all components will last way longer if the following tasks get do in the shown intervals. The maintenance and inspection work listed below is to be carried out at the listed intervals to keep the warranty and to follow up constantly if the LOGO!MAT Component is working well. Any defects found must be documented and fixed before operating again. All time specifications are based on single-shift operations.

With an interval of one (1) month the following preservative maintenance should be carried out:
  1. Check all roller conveyor components for wear and damage.
  2. Visual condition check of all components.
  3. Check if all chain covers are installed.
  4. Visual check of the chain tension in the drive stations.
  5. Lubricate the chain, if necessary.

With an interval of six (6) month the following preservative maintenance should be carried out:

  1. Check if all rollers are still bolted to the extrusions.
  2. Check all detachable connections and fastener; loosen screws have to be tightened.
  3. Check the friction of the rollers.