To change the drive motor, please proceed as follows:
  1. Disconnect the electrical and pneumatic supply of the entire conveyor system and secure against reconnection.
  2. Remove the protective chain cover to get free access to the friction clutch and the attachment bolts of the drive motor.
  3. Release the chain, by moving the entire drive unit against the running direction of the conveyor (see chaper "tension the chain"), and lift the drive sprocket with the friction clutch with sufficient tools.
  4. Remove the four drive motor mounting bolts from the attachment bracket and remove the drive motor completely.
  5. Remove the drive motor downwards.
  6. Install the new drive motor in reverse order.
  7. Connect the electrical connections.
  8. Check the function of the entire unit. Check the settings of the friction clutch and adjust those if necessary.
  9. Install all protection covers before operating the unit.

    Lift Rotate Changing drive motor 1

    Lift Rotate Changing drive motor 2