To replace the index pins, please proceed as follows:
  1. Disconnect the electrical and pneumatic supply of the entire conveyor system and secure against reconnection.
  2. Remove the entire indexing plate (see previous chapter).
  3. Loosen the attachment bolts of the index pins.

    Lift Rotate Replacement index pin 1

    Lift Rotate Replacement index pin 1

  4. Press the index pins out of the indexing plate from below with a suitable tool.
    Please pay attention that the index pin gets pressed out evenly and that the bolt doesn’t bend.

    Lift Rotate Replacement index pin 3

    Lift Rotate Replacement index pin 4

  5. Remove the attachment bolts completely and remove the index pins.
  6. Please follow the steps in reverse order to reinstall the new index pins. 
    Make sure that the pallet rests properly on the pins and adjust the flat rest if needed.

    Lift Rotate Replacement index pin 5

    Lift Rotate Replacement index pin 6