Name:
LOGO!MAT Lift & Rotate Unit, L - Series
 
 
 
Manufacturer:
       LOGOMAT automation systems, Inc.
 
Manufacturer Item No.:
Please see the project related parts list

Material:
Aluminum, steel, galvanized sheet

Operating filtered air pressure:
4-6 bar filtered and dried air

Cylinder of Stop Unit pin:
Bore diameter: 40 mm - Stroke: 21 mm

Cylinder of cushion:
Bore diameter: 40 mm (if cushioned Stop Unit) - Stroke: 35 mm

Lifting Cylinder:
Please see the project related parts list

Pneumatic port size:
Stop Unit: G 1/8
Lifting cylinder: G 1/8
Shot pin: G1/8

Pneumatic components:
Stop Unit, cushioned: 3/2 Roller-level valve (integrated) - 5/2 Solenoid valve for Stop Unit release (required and available as an option)
Stop Unit, non-cushioned: 3/2 Solenoid valve for Stop Unit release (required and available as an option)
Lift & Rotate Unit: 5/2- or 5/3-way valve for lifting control (required and available as an option)
Indexing pin: 3/2 solenoid for pin release, spring return (rewuired and avaiable as an option)

Electrical components:
Sensor stopper pin up /down: 2x inductive sensor 8 mm with cable directly attached (e.g. BES M08MI-PSC20B-BP00, S-GS04), switching distance at least 2 mm
Sensor for lift up / down:
  Version 1: 2x inductive sensor 18 mm with 24 mm mounted sleeve (e.g. BES M18MI-PSC50B-S04G) - optional: without mounted sleeve OR
  Version 2: 2x inductive sensor 12 mm with mounted sleeve (not recommended)
  For both versions: Switching distance at least 5 mm
Pallet presence sensor
  Version 1: 1x inductive sensor 18 mm (e.g. BES M18MI-PSC50B-S04G) - optional: with 24 mm mounting sleeve
  Version 2: 12 mm with mounting sleeve (not recommended), switching distance at least 2 mm
Sensor, end postion reached: 1 x inductive sensor 12 mm with mounting sleeve (e.g. BES M12MI-PSC20B-S04G), switching distance at least 2 mm
Sensor, rotating plate: Up to 4x inductive sensor 18 mm (e.g. BES M18MI-PSC50B-S04G), depending on rotary angle
Sensor, indexing pin: 2x inductive sensor 8 mm with cable directly attached (e.g. BES M08MI-PSC20B-BP00, 2-GS04), switching at least 2 mm
Drive motor with electrical drive: SEW WF10, 0.09 kW, n2=21U/min with 60Hz, Tension: Please see the project related parts list