All LOGO!MAT Components are developed to make very little preservative maintenance necessary but all components will last way longer if the following tasks get do in the shown intervals. The maintenance and inspection work listed below is to be carried out at the listed intervals to keep the warranty and to follow up constantly if the LOGO!MAT Component is working well. Any defects found must be documented and fixed before operating again. All time specifications are based on single-shift operations.

With an interval of one (1) month the following preservative maintenance should be carried out:
  1. Check all parts for wear and damages
  2. Clean the guide shafts (from soiling)
  3. Visual check of the unit for damages and detection of leaks. Replace covers if missing or damaged
  4. Make sure that all safety covers are installed
  5. Check if the unit is working properly