LOGO!MAT XL - Series: Lift Gate

XL Lift Gate

The LOGO!MAT XL Lift Gate is used to get access to the inside of a conveyor loop for maintenance personnel or operators. The Lift Gate is a mechanical component that supports the opening and closing force with a spring package. Operating forces are in a range of 17 - 44 lbs. (8 - 20 kg) depending on the configuration of the system. The operating behavior of the gate can be adjusted in a certain range.

The gate opens more than 90 degrees and the spring package keeps it open. Nevertheless, it should be secured in the upright position with the included safety cables to avoid injuries due to a dropping gate. For safety reasons the opening and closing motion must be controlled manually as the heavy duty gate develops a lot of energy if it closes uncontrolled.

Mechanical return locks for the adjoining conveyor tracks are not part of the standard scope of supply, but are available as an option.

The conveyor drive motor is located underneath the conveyor track, and the drive station is positioned as closes to the pivot point as possible.

All in all, the LOGO!MAT XL Lift Gate is a cost effective solution for maintenance access to the inside of a conveyor loop with tight space constraints.